| Der Scanalyzer FAQ |
 |
- Vergrößerung von Objekten
- Beleuchtung
- VRLM Datei Scanalyzer 1 und Scanalyzer 2 zur Ansicht benötigen Sie einen VRLM viewer, den Sie z.B. bei http://ca.com/cosmo/ erhalten.
- Film 800kb
Kamera(RGB):
Kamera (Fluoreszenz):
Kamera High res. (IEEE)
| Image System | |
| Image device | Interline-transfer, 1/3 inch CCD |
| Effective picture elements | 3 x [768 (H) x 494 (V)]= 1.2 Mio |
| Sensing Area | 6.00 x 4,96 |
| Optical system and functions | |
| Lens mount | C mount |
| Signal system | NTSC colour system |
| Scanning lines | 3 x 525 = 1575 |
| Synchronisation | Internal / external |
| Jitter | Within ±50 nsec. |
| Scanning frequenzy |
Horiz.15.734
Hz |
| Horizontal resulution | 3 x 570 TV lines |
| Vertical lines | 3 x 485 lines |
| Minimum illumination | 31 lx (F2.2 GAIN + 18 dB at 100%) |
| Sensitivity | 2000 lx (F5.6) |
| Video output | real RGB |
| Video S/N | 59 dB |
| Gain | 0 dB to 18 dB (1 dB increments) |
| Shutter | 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/ 4000, 1/10000, 1/12000 |
| Accumulation | FLD / FRM |
| Withe balance | Auto / manual |
| Kamera Fluoreszenz | |
| Image device | 1/2" IT CCD |
| Effective picture elements | 752 (H) x 582 (V) |
| Signal System | CCIR |
| Scanning frequenzy |
Horiz.15.734
Hz |
| Minimum illumination | 0.1 lx |
|
Frame rate |
3.75 frames/s, 7.5 frames/s |
|
Sensivity |
20 lx at: F1.4, Gain + 18 dB |
|
SNR |
tbd |
|
>Interface (optical): |
|
|
Imaging device |
ICX205AK |
|
Size |
1/2" |
|
Type |
CCD interline transfer, progressive scan |
|
Resolution |
H:1280 V:960 |
|
Pixel size |
H:4.65 µm V:4.65 µm |
|
Lens mount |
C-mount |
|
>Interface (electrical): |
|
|
Supply voltage |
8 to 30 VDC |
|
Current consumption |
approx 280 mA (at 12 VDC) |
|
Sync in |
IEEE 1394-1995 |
|
Trigger in |
separate trigger in |
|
Remote in |
IEEE 1394-1995 |
|
Video out |
IEEE 1394-1995 |
|
Sync out |
IEEE 1394-1995 |
|
>Interface (mechanical): |
|
|
Dimensions |
H:50 mm W:55 mm L:110 mm |
|
Mass |
approx 250g |
|
>Adjustments (man): |
|
|
Gain (rmt) |
0 to 18 dB |
|
>Environmental: |
|
|
Max. temperature (operation) |
-5°C to 45°C |
|
Max. temperature (storage) |
-20°C to 60°C |
Der Scanalyzer bietet eine breite Anwendungsmöglichkeit für die Vergrösserung von Objekten. Der Einsatz reicht von makroskopischen Ansichten (20*10 cm) über Vergrößerungen im Millimeter Bereich (Binokular) hin zur Anbindung an alle gebräuchlichen Mikroskope.
The Scanalyzer is able to scan objekts from 20 x 15 cm to 2 x 2 mm.
|
Scanarea |
Scantime |
Resolution
(Pixel) |
µm
/ Pixel |
|
100
x 150 mm |
<0,2
sec. |
752
x 582 per color |
130 |
|
50
x 75 mm |
<0,2
sec. |
752
x 582 per color |
75 |
The system can detect effects which are larger than 0,068 mm² or 0,017 mm² (depending on which lens you use)
LemnaTec offers also a high resolution Linecamera (color) This System is able to scan the folowing areas / Resolutions
|
Scanarea |
Scantime |
Resolution
(Pixel) |
µm
/ Pixel |
|
50
mm x 1600 mm |
<
2 sec. |
2048
x 64000 |
25 |
|
100
mm x 1600 mm |
<
2 sec. |
2048
x 64000 |
50 |
|
200
mm x 1600 mm |
<
2 sec. |
2048
x 64000 |
100 |
Das Scanalyzersystem kann mit den verschiedensten Beleuchtungssystemen ausgestattet werden.
-
Durchlicht
- Auflicht (Cluody Day)
- LED Blauanregung gepulst od. kontinuierlich
- LED Rotanregung gepulst od. kontinuierlich
- Dunkelfeldbeleuchtung
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
LemnaTec
GmbH
Schumanstr. 18
52146 Würselen
Germany
mail: info@lemnatec.de
Tel.: +49 (0) 2405 / 4126-0
Fax.: +49 (0) 2405 / 4126-26
